Logo Search packages:      
Sourcecode: ktechlab version File versions

ktechlab.cpp

/***************************************************************************
 *   Copyright (C) 2003-2005 by David Saxton                               *
 *   david@bluehaze.org                                                    *
 *                                                                         *
 *   This program is free software; you can redistribute it and/or modify  *
 *   it under the terms of the GNU General Public License as published by  *
 *   the Free Software Foundation; either version 2 of the License, or     *
 *   (at your option) any later version.                                   *
 ***************************************************************************/

#include "circuitdocument.h"
#include "config.h"
#include "contexthelp.h"
#include "docmanager.h"
#include "filemetainfo.h"
#include "flowcodedocument.h"
#include "itemeditor.h"
#include "itemgroup.h"
#include "iteminterface.h"
#include "itemlibrary.h"
#include "ktechlab.h"
#include "core/ktlconfig.h"
#include "languagemanager.h"
#include "mechanicsdocument.h"
#include "microlibrary.h"
#include "newfiledlg.h"
#include "oscilloscope.h"
#include "projectmanager.h"
#include "recentfilesaction.h"
#include "settingsdlg.h"
#include "subcircuits.h"
#include "symbolviewer.h"
#include "textdocument.h"
#include "textview.h"
#include "viewcontainer.h"

#include <qdockarea.h>
#include <qtimer.h>
#include <qtoolbutton.h>
#include <qwhatsthis.h>

#include <kaccel.h>
#include <kapplication.h>
#include <kdebug.h>
#include <kedittoolbar.h>
#include <kfiledialog.h>
#include <kiconloader.h>
#include <kio/netaccess.h>
#include <kkeydialog.h>
#include <klocale.h>
#include <kmessagebox.h>
#include <kpopupmenu.h>
#include <kstandarddirs.h>
#include <ktabwidget.h> 
#include <kurldrag.h>
#include <kwin.h>

KTechlab::KTechlab()
      : KateMDI::MainWindow( 0, "KTechlab" )
{
      QTime ct;
      ct.start();
      
      m_bIsShown = false;
      m_pContainerDropSource = 0l;
      m_pContainerDropReceived = 0l;
      m_pContextMenuContainer = 0l;
      m_pFocusedContainer = 0l;
      m_pToolBarOverlayLabel = 0l;
      
      m_pUpdateCaptionsTimer = new QTimer( this );
      connect( m_pUpdateCaptionsTimer, SIGNAL(timeout()), this, SLOT(slotUpdateCaptions()) );
      
      setMinimumSize( 400, 400 );
      
      DocManager::self(this);
      ItemInterface::self(this);
      
      setupTabWidget();
      setupToolDocks();
      setupActions();
      setupView();
      readProperties( KGlobal::config() );
      
//    kdDebug() << "Constructor time: " << ct.elapsed() << endl;
}


KTechlab::~KTechlab()
{
      fileMetaInfo()->saveAllMetaInfo();
      
      delete fileMetaInfo();
      delete itemLibrary(); // This better be the last time the item library is used!
      delete subcircuits();
}


void KTechlab::show()
{
      KateMDI::MainWindow::show();
      m_bIsShown = true;
}


void KTechlab::load( const KURL & url )
{
      if ( url.url().endsWith( ".ktechlab", false ) )
      {
            // This is a ktechlab project; it has to be handled separetly from a
            // normal file.
            
            ProjectManager::self()->slotOpenProject( url );
            return;
      }
      
      
      QString target;
      // the below code is what you should normally do.  in this
      // example case, we want the url to our own.  you probably
      // want to use this code instead for your app
      
      // download the contents
      if ( !KIO::NetAccess::download( url, target, this ) )
      {
            // If the file could not be downloaded, for example does not
            // exist on disk, NetAccess will tell us what error to use
            KMessageBox::error(this, KIO::NetAccess::lastErrorString());
            
            return;
      }
      
      addRecentFile(url);
      
      // set our caption
      setCaption( url.prettyURL() );
      
      // load in the file (target is always local)
      DocManager::self()->openURL( target );
      
      // and remove the temp file
      KIO::NetAccess::removeTempFile( target );
}


00146 QStringList KTechlab::recentFiles()
{
      return m_recentFiles->items();
}


void KTechlab::setupToolDocks()
{
#if defined(KDE_MAKE_VERSION)
# if KDE_VERSION >= KDE_MAKE_VERSION(3,3,0)
      setToolViewStyle( KMultiTabBar::KDEV3ICON );
# endif
#endif
      
      QPixmap pm;
      KIconLoader * loader = KGlobal::iconLoader();
      KateMDI::ToolView * tv = 0l;
      
      tv = createToolView( ProjectManager::toolViewIdentifier(),
                                     KMultiTabBar::Left,
                                     loader->loadIcon( "attach", KIcon::Small ),
                                     i18n("Project") );
      ProjectManager::self( this, tv );
      
      pm.load( locate( "appdata", "icons/circuit.png" ) );
      tv = createToolView( ComponentSelector::toolViewIdentifier(),
                                     KMultiTabBar::Left,
                                     pm,
                                     i18n("Components") );
      ComponentSelector::self(tv);
      
      // Create an instance of the subcircuits interface, now that we have created the component selector
      subcircuits();
      Subcircuits::loadSubcircuits();
      
      pm.load( locate( "appdata", "icons/flowcode.png" ) );
      tv = createToolView( FlowPartSelector::toolViewIdentifier(),
                                     KMultiTabBar::Left,
                                     pm,
                                     i18n("Flow Parts") );
      FlowPartSelector::self(tv);
      
#ifdef MECHANICS
      pm.load( locate( "appdata", "icons/mechanics.png" ) );
      tv = createToolView( MechanicsSelector::toolViewIdentifier(),
                                     KMultiTabBar::Left,
                                     pm,
                                     i18n("Mechanics") );
      MechanicsSelector::self(tv);
#endif
      
      pm.load( locate( "appdata", "icons/item.png" ) );
      tv = createToolView( ItemEditor::toolViewIdentifier(),
                                     KMultiTabBar::Right,
                                     pm,
                                     i18n("Item Editor") );
      ItemEditor::self(tv);
      
      tv = createToolView( ContextHelp::toolViewIdentifier(),
                                     KMultiTabBar::Right,
                                     loader->loadIcon( "contents", KIcon::Small ),
                                     i18n("Context Help") );
      ContextHelp::self(tv);
      
      tv = createToolView( LanguageManager::toolViewIdentifier(),
                                     KMultiTabBar::Bottom,
                                     loader->loadIcon( "log", KIcon::Small ),
                                     i18n("Messages") );
      LanguageManager::self( tv, this );
      
#ifndef NO_GPSIM
      tv = createToolView( SymbolViewer::toolViewIdentifier(),
                                     KMultiTabBar::Right,
                                     loader->loadIcon( "blockdevice", KIcon::Small ),
                                     i18n("Symbol Viewer") );
      SymbolViewer::self(tv);
#endif
      
      addOscilloscopeAsToolView(this);
}


00228 void KTechlab::addWindow( ViewContainer * vc )
{
      if ( vc && !m_viewContainerList.contains(vc) )
      {
            m_viewContainerList << vc;
            connect( vc, SIGNAL(destroyed(QObject* )), this, SLOT(slotViewContainerDestroyed(QObject* )) );
      }
      
      m_viewContainerList.remove((ViewContainer*)0);
      slotUpdateTabWidget();
      slotDocModifiedChanged();
}


void KTechlab::setupView()
{
      setAcceptDrops(true);
      setStandardToolBarMenuEnabled(true);
      setXMLFile("ktechlabui.rc");
      createShellGUI(true);
      action("newfile_popup")->plug( toolBar("mainToolBar"), 0 );
      action("file_new")->unplug( toolBar("mainToolBar") );
      statusBar()->show();
}


00254 void KTechlab::overlayToolBarScreenshot()
{
      if ( !m_pToolBarOverlayLabel )
      {
            m_pToolBarOverlayLabel = new QLabel( 0, 0, WStyle_StaysOnTop | WStyle_Customize | WStyle_NoBorder | WNoAutoErase | WType_Popup  );
            m_pToolBarOverlayLabel->hide();
            m_pToolBarOverlayLabel->setBackgroundMode( NoBackground );
      }
      
      if ( !m_bIsShown )
      {
            // The window isn't visible yet, so there's nothing to overlay (and if we tried,
            // it would appear as a strange floating toolbar).
            return;
      }
      
      if ( m_pToolBarOverlayLabel->isShown() )
      {
            // This is to avoid successive calls to removeGUIClient when we have
            // already popped it up for the first call, and don't want to take
            // another screenshot (as that would be without the toolbar).
            return;
      }
      
      QPtrListIterator<KToolBar> toolBarIterator();
      
//    QWidget * toolsWidget = toolBar( "toolsToolBar" );
//    QWidget * debugWidget = toolBar( "debugTB" );
      
      KToolBar * toolsWidget = static_cast<KToolBar*>(child( "toolsToolBar", "KToolBar" ));
      KToolBar * debugWidget = static_cast<KToolBar*>(child( "debugTB", "KToolBar" ));
      
      if ( !toolsWidget && !debugWidget )
            return;
      
      QWidget * parent = static_cast<QWidget*>(toolsWidget ? toolsWidget->parent() : debugWidget->parent());
      
      QRect grabRect;
      
      // 128 is a sanity check (widget can do strange things when being destroyed)
      
      if ( toolsWidget && toolsWidget->height() <= 128 )
            grabRect |= toolsWidget->geometry();
      if ( debugWidget && debugWidget->height() <= 128 )
            grabRect |= debugWidget->geometry();
      
      if ( !grabRect.isValid() )
            return;
      
      QPixmap shot = QPixmap::grabWidget( parent, grabRect.x(), grabRect.y(), grabRect.width(), grabRect.height() );
      
      m_pToolBarOverlayLabel->move( parent->mapToGlobal( grabRect.topLeft() ) );
      m_pToolBarOverlayLabel->setFixedSize( grabRect.size() );
      m_pToolBarOverlayLabel->setPixmap( shot );
      m_pToolBarOverlayLabel->show();
      
      QTimer::singleShot( 100, this, SLOT( hideToolBarOverlay() ) );
}


00314 void KTechlab::hideToolBarOverlay()
{
      if ( !m_pToolBarOverlayLabel )
            return;
      
//    QWidget * hiddenWidget = toolBar( "toolsToolBar" );
//    if ( !hiddenWidget )
//          return;
      
//    hiddenWidget->setBackgroundMode( NoBackground );
//    hiddenWidget->setWFlags( WNoAutoErase ); 
//    hiddenWidget->setUpdatesEnabled( false );
      
      m_pToolBarOverlayLabel->hide();
}


00331 void KTechlab::addNoRemoveGUIClient( KXMLGUIClient * client )
{
      if ( client && !m_noRemoveGUIClients.contains( client ) )
            m_noRemoveGUIClients << client;
}


00338 void KTechlab::removeGUIClients()
{
      QValueList<KXMLGUIClient*> clientsToRemove;
      
      QPtrList<KXMLGUIClient> clients = factory()->clients();
      for ( KXMLGUIClient * client = clients.first(); client; client = clients.next() )
      {
            if ( client && client != this && !m_noRemoveGUIClients.contains( client ) )
                  clientsToRemove << client;
      }
      
      if ( clients.isEmpty() )
            return;
      
      overlayToolBarScreenshot();
      
      QValueList<KXMLGUIClient*>::iterator end = clientsToRemove.end();
      for ( QValueList<KXMLGUIClient*>::iterator it = clientsToRemove.begin(); it != end; ++it )
            factory()->removeClient(*it);
}


void KTechlab::setupTabWidget()
{     
      m_pViewContainerTabWidget = new KTabWidget(centralWidget());
      connect( tabWidget(), SIGNAL(currentChanged(QWidget* )), this, SLOT(slotViewContainerActivated(QWidget* )) );
      connect( tabWidget(), SIGNAL(testCanDecode(const QDragMoveEvent*, bool& )), this, SLOT(slotTabDragEvent(const QDragMoveEvent*, bool& )) );
      connect( tabWidget(), SIGNAL(initiateDrag(QWidget* )), this, SLOT(slotTabDragInitiate(QWidget* )) );
      connect( tabWidget(), SIGNAL(receivedDropEvent(QDropEvent* )), this, SLOT(slotTabReceivedDropEvent(QDropEvent* )) );
      connect( tabWidget(), SIGNAL(receivedDropEvent(QWidget*, QDropEvent* )), this, SLOT(slotTabReceivedDropEvent(QWidget*, QDropEvent* )) );
      
      KConfig *config = kapp->config();
      config->setGroup("UI");
            
      bool CloseOnHover = config->readBoolEntry( "CloseOnHover", false );
      tabWidget()->setHoverCloseButton( CloseOnHover );
            
      bool CloseOnHoverDelay = config->readBoolEntry( "CloseOnHoverDelay", false );
      tabWidget()->setHoverCloseButtonDelayed( CloseOnHoverDelay );
            
//    bool openNewTabAfterCurrent = config->readBoolEntry( "OpenNewTabAfterCurrent", false );
//    bool showTabIcons = config->readBoolEntry( "ShowTabIcons", true );
  
      if (config->readBoolEntry( "ShowCloseTabsButton", true ))
      {
            QToolButton *but = new QToolButton(tabWidget());
            but->setIconSet(SmallIcon("tab_remove"));
            but->adjustSize();
            but->hide();
            connect( but, SIGNAL(clicked()), this, SLOT(slotViewContainerClose()) );
            tabWidget()->setCornerWidget(but, TopRight);
      }
//    tabWidget()->setTabReorderingEnabled(true);
//    connect(tabWidget(), SIGNAL(movedTab(int, int)), this, SLOT(tabMoved(int, int)));
      connect(tabWidget(), SIGNAL(contextMenu(QWidget*,const QPoint &)), this, SLOT(slotTabContext(QWidget*,const QPoint &)));
      //END Tab bar stuff
}


void KTechlab::slotUpdateTabWidget()
{
      m_viewContainerList.remove( (ViewContainer*)0 );
      
      bool noWindows = m_viewContainerList.isEmpty();
      
      if ( QWidget * button = tabWidget()->cornerWidget(TopRight) )
            button->setHidden( noWindows );
      
      if ( noWindows )
            setCaption( 0 );
}


void KTechlab::setupActions()
{
      KActionCollection *ac = actionCollection();
      
    KStdAction::openNew(                  this, SLOT(slotFileNew()),                            ac );
    KStdAction::open(                     this, SLOT(slotFileOpen()),                           ac );
    KStdAction::save(                     this, SLOT(slotFileSave()),                           ac );
    KStdAction::saveAs(                   this, SLOT(slotFileSaveAs()),                   ac );
      KStdAction::close(                        this, SLOT(slotViewClose()),                    ac );
    KStdAction::print(                    this, SLOT(slotFilePrint()),                    ac );
    KStdAction::quit(                     this, SLOT(slotFileQuit()),                           ac );
      KStdAction::undo(                   this, SLOT(slotEditUndo()),                           ac );
      KStdAction::redo(                   this, SLOT(slotEditRedo()),                           ac );
      KStdAction::cut(                    this, SLOT(slotEditCut()),                            ac );
      KStdAction::copy(                   this, SLOT(slotEditCopy()),                           ac );
      KStdAction::paste(                        this, SLOT(slotEditPaste()),                    ac );
      KStdAction::keyBindings(            this, SLOT(slotOptionsConfigureKeys()),         ac );
      KStdAction::configureToolbars(      this, SLOT(slotOptionsConfigureToolbars()),     ac );
      KStdAction::preferences(            this, SLOT(slotOptionsPreferences()),           ac );
      
      //BEGIN New file popup
      KToolBarPopupAction *p = new KToolBarPopupAction( i18n("&New"), "filenew", KStdAccel::shortcut(KStdAccel::New), this, SLOT(slotFileNew()), ac, "newfile_popup" );
      p->popupMenu()->insertTitle( i18n("New File") );
      (new KAction( i18n("Assembly"), "source", 0, this, SLOT(slotFileNewAssembly()), ac, "newfile_asm" ))->plug( p->popupMenu() );
      (new KAction( i18n("C source"), "source_c", 0, this, SLOT(slotFileNewC()), ac, "newfile_c" ))->plug( p->popupMenu() );
      (new KAction( i18n("Circuit"), "ktechlab_circuit", 0, this, SLOT(slotFileNewCircuit()), ac, "newfile_circuit" ))->plug( p->popupMenu() );
      (new KAction( i18n("FlowCode"), "ktechlab_flowcode", 0, this, SLOT(slotFileNewFlowCode()), ac, "newfile_flowcode" ))->plug( p->popupMenu() );
#ifdef MECHANICS
      (new KAction( i18n("Mechanics"), "ktechlab_mechanics", 0, this, SLOT(slotFileNewMechanics()), ac, "newfile_mechanics" ))->plug( p->popupMenu() );
#endif
      (new KAction( "Microbe", "ktechlab_microbe", 0, this, SLOT(slotFileNewMicrobe()), ac, "newfile_microbe" ))->plug( p->popupMenu() );
      //END New File popup
      

//    m_recentFiles = KStdAction::openRecent( this, SLOT(load(const KURL&)), ac );
      m_recentFiles = new RecentFilesAction( "Recent Files", i18n("Open Recent"), this, SLOT(load(const KURL &)), ac, "file_open_recent" );
    m_statusbarAction = KStdAction::showStatusbar( this, SLOT(slotOptionsShowStatusbar()), ac );
      
      //BEGIN Project Actions
      ProjectManager *pm = ProjectManager::self(this);
      new KAction( i18n("New Project.."), "window_new",                 0, pm, SLOT(slotNewProject()),                  ac,   "project_new" );
      new KAction( i18n("Open Project..."), "project_open",       0, pm, SLOT(slotOpenProject()),                 ac,   "project_open" );
//    m_recentProjects = new KRecentFilesAction( i18n("Open &Recent Project..."), 0, ProjectManager::self(), SLOT(slotOpenProject(const KURL&)), ac, "project_open_recent" );
      m_recentProjects = new RecentFilesAction( "Recent Projects", i18n("Open &Recent Project..."), ProjectManager::self(), SLOT(slotOpenProject(const KURL&)), ac, "project_open_recent" );
      new KAction( i18n("Export to Makefile..."), "fileexport",   0, pm, SLOT(slotExportToMakefile()),            ac, "project_export_makefile" );
      new KAction( i18n("Create Subproject..."), 0,                     0, pm, SLOT(slotCreateSubproject()),            ac, "project_create_subproject" );
      new KAction( i18n("Add Existing File..."), "fileopen",            0, pm, SLOT(slotAddFile()),                           ac, "project_add_existing_file" );
      new KAction( i18n("Add Current File..."), "fileimport",           0, pm, SLOT(slotAddCurrentFile()),              ac, "project_add_current_file" );
//    new KAction( i18n("Project Options"), "configure",                0, pm, SLOT(slotProjectOptions()),              ac, "project_options" );
      new KAction( i18n("Close Project"), "fileclose",                  0, pm, SLOT(slotCloseProject()),                ac, "project_close" );
      new KAction( i18n("Remove from Project"), "editdelete",           0, pm, SLOT(slotRemoveSelected()),              ac, "project_remove_selected" );
      new KAction( i18n("Insert Existing File..."), "fileopen",   0, pm, SLOT(slotSubprojectAddExistingFile()),   ac, "subproject_add_existing_file" );
      new KAction( i18n("Insert Current File..."), "fileimport",  0, pm, SLOT(slotSubprojectAddCurrentFile()),ac, "subproject_add_current_file" );
      new KAction( i18n("Linker Options..."), "configure",        0, pm, SLOT(slotSubprojectLinkerOptions()),     ac, "project_item_linker_options" );
      new KAction( i18n("Build..."), "launch",                          0, pm, SLOT(slotItemBuild()),                   ac, "project_item_build" );
      new KAction( i18n("Upload..."), "convert_to_pic",                 0, pm, SLOT(slotItemUpload()),                        ac, "project_item_upload" );
      new KAction( i18n("Processing Options..."), "configure",    0, pm, SLOT(slotItemProcessingOptions()), ac, "project_item_processing_options" );
      //END Project Actions
      
      new KAction( i18n("Split View Left/Right"), "view_right", Qt::CTRL|Qt::SHIFT|Qt::Key_L, this, SLOT(slotViewSplitLeftRight()), ac, "view_split_leftright" );
      new KAction( i18n("Split View Top/Bottom"), "view_bottom", Qt::CTRL|Qt::SHIFT|Qt::Key_T, this, SLOT(slotViewSplitTopBottom()), ac, "view_split_topbottom" );
      
      KToggleAction * ta = new KToggleAction( i18n("Run Simulation"), "player_play", Qt::Key_F10, 0, 0, ac, "simulation_run" );
      ta->setChecked(true);
      connect( ta, SIGNAL(toggled(bool )), Simulator::self(), SLOT(slotSetSimulating(bool )) );
#if defined(KDE_MAKE_VERSION)
# if KDE_VERSION >= KDE_MAKE_VERSION(3,3,0)
            ta->setCheckedState( KGuiItem( i18n("Pause Simulation"), "player_pause", 0 ) );
# endif
#endif
      
      // We can call slotCloseProject now that the actions have been created
      ProjectManager::self(this)->updateActions();
      
      DocManager::self(this)->disableContextActions();
}


void KTechlab::slotViewContainerActivated( QWidget * viewContainer )
{
      if (m_pFocusedContainer)
            m_pFocusedContainer->setUnfocused();
      
      m_pFocusedContainer = dynamic_cast<ViewContainer*>(viewContainer);
      if ( !m_pFocusedContainer )
            return;
      
      m_pFocusedContainer->setFocused();
}


void KTechlab::slotViewContainerDestroyed( QObject * object )
{
      m_viewContainerList.remove( static_cast<ViewContainer*>(object) );
      m_viewContainerList.remove( (ViewContainer*)0 );
      slotUpdateTabWidget();
}


void KTechlab::slotTabDragEvent( const QDragMoveEvent *e, bool &accept )
{
      // Hmm...this function doesn't actually seem to get called. Instead,
      // KTabBar just seems to go straight to slotTabDragInitiate.
      Q_UNUSED(e);
      accept = true;
}


void KTechlab::slotTabDragInitiate( QWidget *widget )
{
      ViewContainer *viewContainer = dynamic_cast<ViewContainer*>(widget);
      if (!viewContainer)
            return;
      QDragObject *dragObject = new ViewContainerDrag(viewContainer);
      dragObject->drag();
}


void KTechlab::slotTabReceivedDropEvent( QDropEvent *e )
{
      if (!e)
            return;
      ViewContainer *viewContainerSource = dynamic_cast<ViewContainer*>(e->source());
      if (!viewContainerSource)
      {
            e->ignore();
            return;
      }
      e->accept(true);
      viewContainerSource->duplicateViewContainer();
}


void KTechlab::slotTabReceivedDropEvent( QWidget *widget, QDropEvent *e )
{
      if (!e)
            return;
      m_pContainerDropSource = dynamic_cast<ViewContainer*>(e->source());
      m_pContainerDropReceived = dynamic_cast<ViewContainer*>(widget);
      if ( !m_pContainerDropSource || !m_pContainerDropReceived || (m_pContainerDropSource == m_pContainerDropReceived) )
      {
            e->ignore();
            return;
      }
      e->accept(true);
      
      KPopupMenu dropMenu;
      dropMenu.insertItem( KGlobal::iconLoader()->loadIcon( "goto", KIcon::Small ), i18n("&Insert Into"), 0 );
      dropMenu.insertItem( KGlobal::iconLoader()->loadIcon( "editcopy", KIcon::Small ), i18n("&Copy Into"), 1 );
      dropMenu.insertSeparator();
      dropMenu.insertItem( KGlobal::iconLoader()->loadIcon( "stop", KIcon::Small ), i18n("C&ancel"), 2 );
      
      connect( &dropMenu, SIGNAL(activated(int)), this, SLOT(slotDragContextActivated(int)) );
//    dropMenu.exec(e->pos() + widget->pos() );
      dropMenu.exec( QCursor::pos() );
}


void KTechlab::slotDragContextActivated( int id )
{
      if ( !m_pContainerDropSource || !m_pContainerDropReceived )
            return;
      
      switch (id)
      {
            case 0:
                  m_pContainerDropSource->copyViewContainerIntoExisting(m_pContainerDropReceived);
                  m_pContainerDropSource->closeViewContainer();
                  break;
            case 1:
                  m_pContainerDropSource->copyViewContainerIntoExisting(m_pContainerDropReceived);
                  break;
            case 2:
            default:
                  break;
      }
}


00590 KAction * KTechlab::action( const QString & name ) const
{
      KAction * action = actionCollection()->action(name);
      if ( !action )
            kdError() << k_funcinfo << "No such action: " << name << endl;
      return action;
}


00599 void KTechlab::saveProperties( KConfig *conf )
{
      // Dumbass KMainWindow - can't handle my width/height correctly. Whoever thought of the "+1" hack anyway?!
      conf->setGroup("UI");
      conf->writeEntry( "Width", width() );
      conf->writeEntry( "Height", height() );
      conf->writeEntry( "WinState", KWin::windowInfo( winId(), NET::WMState ).state() );
      
#ifndef NO_GPSIM
      SymbolViewer::self()->saveProperties( conf );
#endif
      
      if ( ProjectManager::self()->currentProject() )
      {
            conf->setGroup("Project");
            conf->writePathEntry( "Open", ProjectManager::self()->currentProject()->url().prettyURL() );
      }
      else
            conf->deleteGroup("Project");
      
      //BEGIN Open Views State
      // Remvoe old entries describing the save state - we don't want a horrible mish-mash of saved states
      const QStringList groupList = conf->groupList();
      const QStringList::const_iterator groupListEnd = groupList.end();
      for ( QStringList::const_iterator it = groupList.begin(); it != groupListEnd; ++it )
      {
            if ( (*it).startsWith("ViewContainer") )
                  conf->deleteGroup(*it);
      }
      
      uint viewContainerId = 1;
      const ViewContainerList::iterator vcEnd = m_viewContainerList.end();
      for ( ViewContainerList::iterator it = m_viewContainerList.begin(); it != vcEnd; ++it )
      {
            if ( !(*it) || !(*it)->canSaveUsefulStateInfo() )
                  continue;
            
            // To make sure the ViewContainers are restored in the right order, we must create them in alphabetical order,
            // as KConfig stores them as such...
            const QString id = QString::number(viewContainerId++).rightJustify( 4, '0' );
                  
            conf->setGroup( "ViewContainer " + id );
            (*it)->saveState(conf);
      }
      //END Open Views State
      
      saveSession( conf, "KateMDI" );
      // Piss off KMainWindow
      conf->setGroup("KateMDI");
      int scnum = QApplication::desktop()->screenNumber(parentWidget());
      QRect desk = QApplication::desktop()->screenGeometry(scnum);
      conf->deleteEntry( QString::fromLatin1("Width %1").arg(desk.width()) );
      conf->deleteEntry( QString::fromLatin1("Height %1").arg(desk.height()) );
      
      conf->sync();
}


00657 void KTechlab::readProperties( KConfig *conf )
{
      startRestore( conf, "KateMDI" );
      
      m_recentFiles->loadEntries();
      m_recentProjects->loadEntries();
      
      //BEGIN Restore Open Views
      if ( KTLConfig::restoreDocumentsOnStartup() )
      {
            // If we have a lot of views open from last time, then opening them will take a long time.
            // So we want to enter the qt event loop to finish drawing the window et al before adding the views.
            qApp->processEvents();
      
            const QStringList groupList = conf->groupList();
            const QStringList::const_iterator groupListEnd = groupList.end();
            for ( QStringList::const_iterator it = groupList.begin(); it != groupListEnd; ++it )
            {
                  if ( (*it).startsWith("ViewContainer") )
                  {
                        ViewContainer *viewContainer = new ViewContainer( *it, this );
                  
                        conf->setGroup(*it);
                        viewContainer->restoreState( conf, *it );
                  
                        addWindow( viewContainer );
                  }
            }
      }
      //END Restore Open Views
      
      conf->setGroup("Project");
      if ( conf->readPathEntry("Open") != QString::null )
            ProjectManager::self()->slotOpenProject( KURL( conf->readPathEntry("Open") ) );
      
#ifndef NO_GPSIM
      SymbolViewer::self()->readProperties( conf );
#endif
      
      finishRestore();
      
      // Dumbass KMainWindow - can't handle my width/height correctly. Whoever thought of the "+1" hack anyway?!
      conf->setGroup("UI");
      resize( conf->readNumEntry( "Width", 800 ), conf->readNumEntry( "Height", 500 ) );
      KWin::setState( winId(), conf->readLongNumEntry( "WinState", NET::Max ) );
}


00705 void KTechlab::dragEnterEvent(QDragEnterEvent *event)
{
    // accept uri drops only
    event->accept(KURLDrag::canDecode(event));
}


void KTechlab::dropEvent(QDropEvent *event)
{
    // this is a very simplistic implementation of a drop event.  we
    // will only accept a dropped URL.  the Qt dnd code can do *much*
    // much more, so please read the docs there
    KURL::List urls;

    // see if we can decode a URI.. if not, just ignore it
    if (KURLDrag::decode(event, urls) && !urls.isEmpty())
    {
        // okay, we have a URI.. process it
        const KURL &url = urls.first();

        // load in the file
        load(url);
    }
}


void KTechlab::slotOptionsShowStatusbar()
{
    // this is all very cut and paste code for showing/hiding the
    // statusbar
    if (m_statusbarAction->isChecked())
        statusBar()->show();
    else
        statusBar()->hide();
}


void KTechlab::slotOptionsConfigureKeys()
{
//     KKeyDialog::configureKeys(actionCollection(), "ktechlabui.rc");
      KKeyDialog::configure( actionCollection(), this, true );
}


void KTechlab::slotOptionsConfigureToolbars()
{
      KEditToolbar *dlg = new KEditToolbar(guiFactory());

      if (dlg->exec())
      {
            createShellGUI( false );
            createShellGUI( true );
      }

      delete dlg;
}


void KTechlab::slotOptionsPreferences()
{
      // An instance of your dialog could be already created and could be cached,
      // in which case you want to display the cached dialog instead of creating
      // another one
      if ( KConfigDialog::showDialog( "settings" ) )
            return;
      
      // KConfigDialog didn't find an instance of this dialog, so lets create it:
      SettingsDlg* dialog = new SettingsDlg( this, "settings", KTLConfig::self() );
      
      // User edited the configuration - update your local copies of the
      // configuration data
      connect( dialog, SIGNAL(settingsChanged()), this, SLOT(slotUpdateConfiguration()) );
      dialog->show();
}


void KTechlab::slotUpdateConfiguration()
{
      emit configurationChanged();
}


void KTechlab::slotChangeStatusbar( const QString & text )
{
      // Avoid flicker by repeatedly displaying the same message, as QStatusBar does not check for this
      if ( m_lastStatusBarMessage == text )
            return;
      
    statusBar()->message(text);
      m_lastStatusBarMessage = text;
}


00798 void KTechlab::slotTabContext( QWidget* widget,const QPoint & pos )
{
      // Shamelessly stolen from KDevelop...
      
      KPopupMenu * tabMenu = new KPopupMenu;
      tabMenu->insertTitle( (dynamic_cast<ViewContainer*>(widget))->caption() );

      //Find the document on whose tab the user clicked
      m_pContextMenuContainer = 0l;
      
      m_viewContainerList.remove((ViewContainer*)0l);
      
      const ViewContainerList::iterator vcEnd = m_viewContainerList.end();
      for ( ViewContainerList::iterator it = m_viewContainerList.begin(); it != vcEnd; ++it )
      {
            ViewContainer * viewContainer = *it;
            if ( viewContainer == widget )
            {
                  m_pContextMenuContainer = viewContainer;
                  
                  tabMenu->insertItem( i18n("Close"), 0 );
                  
                  View *view = (viewContainer->viewCount() == 1) ? viewContainer->activeView() : 0l;
                  
                  if ( view && view->document()->isModified() )
                        tabMenu->insertItem( i18n("Save"), 1 );
                  
                  if ( view && !view->document()->url().isEmpty() )
                        tabMenu->insertItem( i18n("Reload"), 2 );
                  
                  if ( m_viewContainerList.count() > 1 )
                        tabMenu->insertItem( i18n("Close All Others"), 4 );

            }
      }
      
      connect( tabMenu, SIGNAL( activated(int) ), this, SLOT(slotTabContextActivated(int)) );

      tabMenu->exec(pos);
      delete tabMenu;
}


00841 void KTechlab::slotTabContextActivated( int id )
{
      // Shamelessly stolen from KDevelop...
      
      if( !m_pContextMenuContainer )
            return;
      
      View *view = m_pContextMenuContainer->activeView();
      if (!view)
            return;
      QGuardedPtr<Document> document = view->document();

      switch(id)
      {
            case 0:
            {
                  m_pContextMenuContainer->closeViewContainer();
                  break;
            }
            case 1:
                  document->fileSave();
                  break;
            case 2:
            {
                  KURL url = document->url();
                  if ( document->fileClose() )
                  {
                        delete document;
                        DocManager::self()->openURL(url);
                  }
                  break;
            }
            case 4:
            {
                  const ViewContainerList::iterator vcEnd = m_viewContainerList.end();
                  for ( ViewContainerList::iterator it = m_viewContainerList.begin(); it != vcEnd; ++it )
                  {
                        ViewContainer *viewContainer = *it;
                        if ( viewContainer && viewContainer != m_pContextMenuContainer )
                        {
                              if ( !viewContainer->closeViewContainer() )
                                    return;
                        }
                  }
                  break;
            }
            default:
                  break;
      }
}
      


void KTechlab::slotFileNewAssembly()
{
      TextDocument *document = DocManager::self()->createTextDocument();
      if (document)
            document->slotInitLanguage( TextDocument::ct_asm );
}
void KTechlab::slotFileNewMicrobe()
{
      TextDocument *document = DocManager::self()->createTextDocument();
      if (document)
            document->slotInitLanguage( TextDocument::ct_microbe );
}
void KTechlab::slotFileNewC()
{
      TextDocument *document = DocManager::self()->createTextDocument();
      if (document)
            document->slotInitLanguage( TextDocument::ct_c );
}
void KTechlab::slotFileNewCircuit()
{
      DocManager::self()->createCircuitDocument();
}
void KTechlab::slotFileNewFlowCode()
{
      slotFileNew();
}
void KTechlab::slotFileNewMechanics()
{
      DocManager::self()->createMechanicsDocument();
}

void KTechlab::slotFileNew()
{
      NewFileDlg *newFileDlg = new NewFileDlg(this);
      
      newFileDlg->exec();
      
      bool addToProject = newFileDlg->addToProject();
      bool accepted = newFileDlg->accepted();
      int finalType = newFileDlg->fileType();
      QString microID = newFileDlg->microID();
      int codeType = newFileDlg->codeType();
      
      delete newFileDlg;
      if (!accepted)
            return;
      
      Document *created = 0l;
      
      if ( finalType == Document::dt_circuit )
            created = DocManager::self()->createCircuitDocument();
      
      else if ( finalType == Document::dt_flowcode )
      {
            FlowCodeDocument * fcd = DocManager::self()->createFlowCodeDocument();
            fcd->setPicType(microID);
            created = fcd;
      }
      
      else if ( finalType == Document::dt_mechanics )
            created = DocManager::self()->createMechanicsDocument();
      
      else
      {
            // Presumably a text document
            TextDocument * textDocument = DocManager::self()->createTextDocument();
      
            if (textDocument)
                  textDocument->slotInitLanguage( (TextDocument::CodeType)codeType );
            
            created = textDocument;
      }
      
      if ( created && addToProject )
            created->setAddToProjectOnSave(true);
}

void KTechlab::slotFileOpen()
{
    // this slot is called whenever the File->Open menu is selected,
    // the Open shortcut is pressed (usually CTRL+O) or the Open toolbar
    // button is clicked
      
    // standard filedialog
      KURL::List urls = getFileURLs();
      const KURL::List::iterator end = urls.end();
      for ( KURL::List::iterator it = urls.begin(); it != end; ++ it)
            load(*it);
}

00984 void KTechlab::addRecentFile( const KURL &url )
{
      m_recentFiles->addURL( url );
      emit recentFileAdded(url);
}


00991 KURL::List KTechlab::getFileURLs()
{
      return KFileDialog::getOpenURLs(
                  QString::null,
              "*|All Files\n"
                  "*.asm *.src *.inc|Assembly Code (*.asm, *.src, *.inc)\n"
                  "*.hex|Intel Hex (*.hex)\n"
                  "*.circuit|Circuit (*.circuit)\n"
                  "*.flowcode|FlowCode (*.flowcode)\n"
                  "*.basic *.microbe|Microbe (*.microbe, *.basic)\n"
                  "*.mechanics|Mechanics (*.mechanics)\n",
                  0L,
                  i18n("Open Location") );
}


01007 void KTechlab::slotDocModifiedChanged()
{
      //BEGIN Set tab icons
      KIconLoader *loader = KGlobal::iconLoader();
      const ViewContainerList::iterator vcEnd = m_viewContainerList.end();
      for ( ViewContainerList::iterator it = m_viewContainerList.begin(); it != vcEnd; ++it )
      {
            ViewContainer * vc = *it;
            if ( !vc || !vc->activeView() || !vc->activeView()->document() )
                  continue;
            
            QString iconName;
            
            if ( vc->activeView()->document()->isModified() )
                  iconName = "filesave";
            
            else switch ( vc->activeView()->document()->type() )
            {
                  case Document::dt_circuit:
                        iconName = "ktechlab_circuit";
                        break;
                        
                  case Document::dt_flowcode:
                        iconName = "ktechlab_flowcode";
                        break;
                        
                  case Document::dt_mechanics:
                        iconName = "ktechlab_mechanics";
                        break;
                        
                  case Document::dt_text:
                        iconName = "txt";
                        break;
                        
                  case Document::dt_pinMapEditor:
                        break;
                        
                  case Document::dt_none:
                        iconName = "unknown";
                        break;
            }
            
            tabWidget()->setTabIconSet( vc, loader->loadIcon( iconName, KIcon::Small ) );
      }
      //END Set tab icons
}


01055 void KTechlab::requestUpdateCaptions()
{
      m_pUpdateCaptionsTimer->start( 0, true );
}


01061 void KTechlab::slotUpdateCaptions()
{
      //BEGIN Set KTechlab caption
      Document *document = DocManager::self()->getFocusedDocument();
      QString newCaption;
      if ( document )
      {
            KURL url = document->url();
            if ( url.isEmpty() )
                  newCaption = document->caption();
            else
            {
                  if ( url.isLocalFile() && url.ref().isNull() && url.query().isNull() )
                        newCaption = url.path();
                  else
                        newCaption = url.prettyURL();
            }
      }
      else
            newCaption = "";
      
      if (newCaption != caption().remove(" - KTechlab"))
            setCaption(newCaption);
      //END Set KTechlab caption
      
      
      //BEGIN Set tab captions
      emit needUpdateCaptions();
      
      if ( document && document->activeView() && document->activeView()->viewContainer() )
      {
            document->activeView()->viewContainer()->updateCaption();
      }
      //END Set tab captions
}


01098 void KTechlab::slotDocUndoRedoChanged()
{
      Document *document = DocManager::self()->getFocusedDocument();
      if (!document)
            return;
      
      action("edit_undo")->setEnabled( document->isUndoAvailable() );
      action("edit_redo")->setEnabled( document->isRedoAvailable() );
}

void KTechlab::slotFileSave()
{
      Document *document = DocManager::self()->getFocusedDocument();
      if (document)
            document->fileSave();
}

void KTechlab::slotFileSaveAs()
{
      Document *document = DocManager::self()->getFocusedDocument();
      if (document)
            document->fileSaveAs();
}

void KTechlab::slotFilePrint()
{
      Document *document = DocManager::self()->getFocusedDocument();
      if (document)
            document->print();
}


01130 bool KTechlab::queryClose()
{
      saveProperties( KGlobal::config() );
      
      if ( DocManager::self()->closeAll() && ProjectManager::self()->slotCloseProject() )
      {
            ViewContainerList::iterator end = m_viewContainerList.end();
            for ( ViewContainerList::iterator it = m_viewContainerList.begin(); it != end; ++it )
            {
                  if ( *it )
                        (*it)->setKTechlabDeleted();
            }
            
            return true;
      }
      
      return false;
}

void KTechlab::slotFileQuit()
{
      // close the first window, the list makes the next one the first again.
      // This ensures that queryClose() is called on each window to ask for closing
      KMainWindow* w;
      if(memberList)
      {
            for( w=memberList->first(); w!=0; w=memberList->next() )
            {
                  // only close the window if the closeEvent is accepted. If the user presses Cancel on the saveModified() dialog,
                  // the window and the application stay open.
                  if( !w->close() ) break;
            }
      }
      
    slotChangeStatusbar( i18n("Exiting...") );
}

void KTechlab::slotEditUndo()
{
      Document *document = DocManager::self()->getFocusedDocument();
      if (document)
            document->undo();
}

void KTechlab::slotEditRedo()
{
      Document *document = DocManager::self()->getFocusedDocument();
      if (document)
            document->redo();
}

void KTechlab::slotEditCut()
{
      Document *document = DocManager::self()->getFocusedDocument();
      if (document)
            document->cut();
}

void KTechlab::slotEditCopy()
{
      Document *document = DocManager::self()->getFocusedDocument();
      if (document)
            document->copy();
}

void KTechlab::slotEditPaste()
{
      Document *document = DocManager::self()->getFocusedDocument();
      if (document)
            document->paste();
}

void KTechlab::slotViewContainerClose()
{
      if (m_pFocusedContainer)
            m_pFocusedContainer->closeViewContainer();
}
void KTechlab::slotViewClose()
{
      View *view = DocManager::self()->getFocusedView();
      if (view)
            view->closeView();
}
01213 void KTechlab::slotViewSplitLeftRight()
{
      View *view = DocManager::self()->getFocusedView();
      if (!view)
            return;
      ViewContainer *vc = view->viewContainer();
      uint vaId = vc->createViewArea( view->viewAreaId(), ViewArea::Right );
      view->document()->createView( vc, vaId );
}
01222 void KTechlab::slotViewSplitTopBottom()
{
      View *view = DocManager::self()->getFocusedView();
      if (!view)
            return;
      ViewContainer *vc = view->viewContainer();
      uint vaId = vc->createViewArea( view->viewAreaId(), ViewArea::Bottom );
      view->document()->createView( vc, vaId );
}

#include "ktechlab.moc"

Generated by  Doxygen 1.6.0   Back to index